Gembird EG-PM2-LAN Manual do Utilizador descarregar pdf (Página 15)

EG-PM2-LAN PROGRAMMABLE POWER

OUTLET STRIP WITH LAN INTERFACE

All brands and logos are registered trademarks of their respective owners

3.4. IP configuration

The utility Find EG-PM2-LAN (see Figure #4 below) will run

automatically during the software installation but it can also be started

from Start/All Programs/Gembird/Power Manager. The IP range where

you would like to search for EG-PM2-LAN will be set automatically

according to the IP settings of your LAN adapter but can be changed

manually in the Adapter subnet fields. Now press the Search button.

NOTE: only EG-PM2-LAN within a local subnet can be found. If your

computer LAN adapter is not in the (default) subnet of EG-PM2-LAN (as

might probably be the case if you chose option B section 3.2) you will

have to change its IP address manually to be able to find EG-PM2-LAN.

For example if you wish to find EG-PM2-LAN (with the default IP

192.168.0.254), the IP address of your computer should be set as

192.168.0.XXX (where XXX stands for any digit, for example 1) and the

subnet mask should be 255.255.255.0.

After the searching the IP addresses of the found EG-PM2-LAN

devices will appear in the list box. Select EG-PM2-LAN which you want to

access, and press the Open button (see Figure #4 below).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 64 65

Sem comentários

Gembird EG-PM2-LAN Manual do Utilizador Página 15